Page 1 of 1
Aluminium Work Needed for new Tinny Rebuild.
Posted: Wed Aug 03, 2022 7:33 am
by Smitty138
Hi all
Just purchased my first tinny and i need some aluminium work done, weld checks ect in the North east Albury ,Wodonga area.
Any help would be great.Can't wait to get on the water.
Re: Aluminium Work Needed for new Tinny Rebuild.
Posted: Wed Aug 03, 2022 9:03 pm
by fishnut
One would usually do checks before buying I would think
Re: Aluminium Work Needed for new Tinny Rebuild.
Posted: Thu Aug 04, 2022 9:41 am
by hornet
When I bought my used tinny I had the seller fill the boat with water just above the chine, found one pin hole from a sinker wedged between one of the the struts and outer hull, it was an easy fix with a blind rivet and sikaflex but I bought the boat knowing this...
Re: Aluminium Work Needed for new Tinny Rebuild.
Posted: Thu Aug 04, 2022 2:39 pm
by Russell Harris
Google "Aluminium Fabrication Albury Wodonga" and check the results - Ring around to the listed suppliers and ask if they do what you want?? - Weld / Crack Inspection, etc. Ask for a Quote via your email, and go from there. I was in Yack, now in Wang - Feedback appreciated
Re: Aluminium Work Needed for new Tinny Rebuild.
Posted: Thu Aug 04, 2022 7:47 pm
by Smitty138
Thanks Russell thats the line i was thinking of going down....Fishnut you've been no help at all.
Re: Aluminium Work Needed for new Tinny Rebuild.
Posted: Thu Aug 04, 2022 10:06 pm
by fishnut
My apologies here's ones called -Crossover alloy boat builders in Albury
Re: Aluminium Work Needed for new Tinny Rebuild.
Posted: Fri Aug 05, 2022 8:16 pm
by Smitty138
I've got there numbers thanks.