Another quick 2 hrs session in the yarra, tried diff spot. 7-9pm. I'm getting the hang of this yarra bream fishing, starting to show some consistency in the catching rate.
Yarra being dirtier and tidal, is easier to fool the bream than Docklands.
Started with zman grub motor oil as usual and 1/28 #2 hidden weight jih head. Swarmed by the smaller ones left right center, mid top bottom water, was just hit, tap, hit, couldn't get to the big ones.
.
.
Moved a bit and I saw a school of good sized bream from the bridge, they weren't spooked when I was on the bridge, but soon I came down by the bank they're gone. So I waited few mins back on the bridge, saw them, and then I approached them like a ninja, stood 2-3 meters from the water. The ninja approaching 'technique' worked! Hooked more bream, but same, smaller ones got to the grub first before the bigger ones.
.
.
Moved and changed to sx40, hoping the smaller ones won't be hitting it and only the aggressive big ones would.
And again, it worked! Landed a solid healthy 28cm. Hit like an EP, I thought it was an EP, but it was a solid bream. Not a monster but fun regardless.
.
.
.
My reflection is I found my catch rate got better since I started using light medium taper rod, super thin braid, 3m long of fluorocarbon leader, lightest jighead possible and suuuuper slow retrieve. When I thought I did slow enough, I had to slow it even more.
Still struggling when there's a bit of current as the plastic with light jighead couldn't get deep enough, heavier jighead isn't finesse enough and spook them easily.
Any tips on fishing finesse on a bit of current?
More of yarra bream and learning curve
- Sebb
- Rank: Premium Member
- Joined: Mon Jun 13, 2016 3:30 pm
- Has liked: 3020 times
- Likes received: 1584 times
More of yarra bream and learning curve
------------------------------
A fish is a fish
No fish is worth a life, stay safe
A fish is a fish
No fish is worth a life, stay safe
-
- Rank: Snapper
- Joined: Tue Jan 14, 2020 1:32 pm
- Has liked: 798 times
- Likes received: 433 times
Re: More of yarra bream and learning curve
Well done Seb, that looks like a well thought out session there. I really like the way you explain your tactics. You hit the nail on the head about slowing everything right down and also going to a light/medium rod, I also use 2 to 3 mtrs of 4lb fluro as a leader. Can't help you with current because I have always tried to avoid areas with current, some people use a really deep diver if there is a bit currentSebb wrote: ↑Fri Feb 19, 2021 8:13 amAnother quick 2 hrs session in the yarra, tried diff spot. 7-9pm. I'm getting the hang of this yarra bream fishing, starting to show some consistency in the catching rate.
Yarra being dirtier and tidal, is easier to fool the bream than Docklands.
Started with zman grub motor oil as usual and 1/28 #2 hidden weight jih head. Swarmed by the smaller ones left right center, mid top bottom water, was just hit, tap, hit, couldn't get to the big ones.
.
IMG20210218192826_resize_45.jpg
.
Moved a bit and I saw a school of good sized bream from the bridge, they weren't spooked when I was on the bridge, but soon I came down by the bank they're gone. So I waited few mins back on the bridge, saw them, and then I approached them like a ninja, stood 2-3 meters from the water. The ninja approaching 'technique' worked! Hooked more bream, but same, smaller ones got to the grub first before the bigger ones.
.
IMG20210218191601_resize_58.jpg
.
Moved and changed to sx40, hoping the smaller ones won't be hitting it and only the aggressive big ones would.
And again, it worked! Landed a solid healthy 28cm. Hit like an EP, I thought it was an EP, but it was a solid bream. Not a monster but fun regardless.
.
IMG20210218193314_resize_14.jpg
.
IMG20210218193257_resize_2.jpg
.
My reflection is I found my catch rate got better since I started using light medium taper rod, super thin braid, 3m long of fluorocarbon leader, lightest jighead possible and suuuuper slow retrieve. When I thought I did slow enough, I had to slow it even more.
Still struggling when there's a bit of current as the plastic with light jighead couldn't get deep enough, heavier jighead isn't finesse enough and spook them easily.
Any tips on fishing finesse on a bit of current?
- Sebb
- Rank: Premium Member
- Joined: Mon Jun 13, 2016 3:30 pm
- Has liked: 3020 times
- Likes received: 1584 times
Re: More of yarra bream and learning curve
Thanks!Seniorfisho wrote: ↑Fri Feb 19, 2021 8:33 amWell done Seb, that looks like a well thought out session there. I really like the way you explain your tactics. You hit the nail on the head about slowing everything right down and also going to a light/medium rod, I also use 2 to 3 mtrs of 4lb fluro as a leader. Can't help you with current because I have always tried to avoid areas with current, some people use a really deep diver if there is a bit current
And yeah the last two trips I avoided areas with current.
Using diving hardbodies was doable but the hardbody either 'shaking' too hard and 'shaking' too fast (against the current) and spooked the fish, ok for EP though,
or not 'shaking' enough and came to me too quickly when I retrieved with the current, and the fish didn't even bother looking.
Almost impossible to get to the bottom and finesse fishing with 1/40, 1/32 and even sometimes 1/28 in a water with some current.
------------------------------
A fish is a fish
No fish is worth a life, stay safe
A fish is a fish
No fish is worth a life, stay safe
-
- Rank: King George Whiting
- Joined: Sun May 27, 2012 6:21 pm
- Has liked: 25 times
- Likes received: 58 times
Re: More of yarra bream and learning curve
Metal blades work really well in Docklands, and so do small sinking hard bodies like the strike pro micro vibes. Maybe give them a go. Otherwise when the Yarra is flowing too much you can walk over to Docklands, I've caught more in the docks than the Yarra.
- Sebb
- Rank: Premium Member
- Joined: Mon Jun 13, 2016 3:30 pm
- Has liked: 3020 times
- Likes received: 1584 times
Re: More of yarra bream and learning curve
Yeah ok, I'm still trying to crack the code of Docklands bream. I tried few times there and my catch rate there is terrible. Certainly yarra is easier for me
I caught couple bream years ago on metal vibe, in wet early spring though, water was a bit dirty and so much freshwater on top, so the bream was on the bottom. Might try again now that I use longer thinner line etc. That could be the cause.
------------------------------
A fish is a fish
No fish is worth a life, stay safe
A fish is a fish
No fish is worth a life, stay safe