What up with my f..ken hotwater?

Everything that has nothing to do with fishing.
Lightningx
Bluefin
Bluefin
Joined: Wed Oct 01, 2014 4:21 pm
Has liked: 72 times
Likes received: 976 times

Re: What up with my f..ken hotwater?

Post by Lightningx » Fri May 18, 2018 1:07 pm

Yea that’s right! What happens then??? :rofl:

Texas
Rank: Premium Member
Rank: Premium Member
Joined: Tue Jun 17, 2014 10:41 am
Location: Hoppers Crossing
Has liked: 221 times
Likes received: 460 times

Re: What up with my f..ken hotwater?

Post by Texas » Fri May 18, 2018 1:17 pm

Had a leaking emergency relief valve on a hot water service
First thing plumber asked was " have you tried to fix it"????
Gra

Lightningx
Bluefin
Bluefin
Joined: Wed Oct 01, 2014 4:21 pm
Has liked: 72 times
Likes received: 976 times

Re: What up with my f..ken hotwater?

Post by Lightningx » Fri May 18, 2018 1:21 pm

Wtf? :rofl:

Dazzac
New Member
Joined: Mon Sep 29, 2014 8:26 pm

Re: What up with my f..ken hotwater?

Post by Dazzac » Fri May 18, 2018 2:31 pm

If you remove that grommet I don't think you will not use anymore water than previous. You will have the taps opened that much less.
If you have put on one of those water saving heads as such, remove that grommet and you will be having the best of showers...
Daz

Mattblack
Rank: Gummy Shark
Rank: Gummy Shark
Joined: Tue Sep 06, 2016 1:08 pm
Location: South East Suburbs
Has liked: 625 times
Likes received: 298 times

Re: What up with my f..ken hotwater?

Post by Mattblack » Fri May 18, 2018 3:28 pm

purple5ive wrote:
Mattblack wrote:
purple5ive wrote:
smile0784 wrote:Shower was fine.for 2.years then stated dripping even tho turned taps on super hard ao i replaced washes and now problem started
And the Moral of the story is??

Get the Professionals to look at it :rofl:

also take those grommets out and you will use a lot more water than normal, its there for a reason!
That's un-Australian! Might cost you twice as much as getting a plumber, but at least you can say you fixed it yourself!

Worse case scenario is that you buy a set of new taps (you might have buggered them by wrenching them tight instead of replacing the washers)
unaustralian hah!! its called being smart hahaha
what if you can never fix it yourself??
I bet you're one of those guys that reads instructions before you give it a crack as well...for shame!
Seriously though, has anyone else noticed tradies charge more per hour than a brain surgeon these days?

Lightningx
Bluefin
Bluefin
Joined: Wed Oct 01, 2014 4:21 pm
Has liked: 72 times
Likes received: 976 times

Re: What up with my f..ken hotwater?

Post by Lightningx » Fri May 18, 2018 4:48 pm

Mattblack wrote:
purple5ive wrote:
Mattblack wrote:
purple5ive wrote:
smile0784 wrote:Shower was fine.for 2.years then stated dripping even tho turned taps on super hard ao i replaced washes and now problem started
And the Moral of the story is??

Get the Professionals to look at it :rofl:

also take those grommets out and you will use a lot more water than normal, its there for a reason!
That's un-Australian! Might cost you twice as much as getting a plumber, but at least you can say you fixed it yourself!

Worse case scenario is that you buy a set of new taps (you might have buggered them by wrenching them tight instead of replacing the washers)
unaustralian hah!! its called being smart hahaha
what if you can never fix it yourself??
I bet you're one of those guys that reads instructions before you give it a crack as well...for shame!
Seriously though, has anyone else noticed tradies charge more per hour than a brain surgeon these days?
Yep have had to get a fair few quotes and noticed this as well. Call out fee then their hourly rate on top.

purple5ive
Rank: Premium Member
Rank: Premium Member
Joined: Thu Dec 08, 2011 1:59 pm
Has liked: 567 times
Likes received: 1011 times

Re: What up with my f..ken hotwater?

Post by purple5ive » Fri May 18, 2018 5:41 pm

Nah manuals never get read ever.
And I generally try to diy unless it's electrical or gas. And couple otger stuff where I wouldn't want to cause problems.
I said call the pro is because smiley is generally working most times. So it's probably the easiest way out. But he is generally handy with diy so its up to him.

smile0784
Rank: Premium Member
Rank: Premium Member
Joined: Thu Apr 26, 2012 5:16 pm
Has liked: 39 times
Likes received: 356 times

Re: What up with my f..ken hotwater?

Post by smile0784 » Fri May 18, 2018 6:03 pm

purple5ive wrote:
smile0784 wrote:Shower was fine.for 2.years then stated dripping even tho turned taps on super hard ao i replaced washes and now problem started
And the Moral of the story is??

Get the Professionals to look at it :rofl:

also take those grommets out and you will use a lot more water than normal, its there for a reason!
If you can fix it should try lol
Plumber quoted $100 call out fee plus $80 per hour min of 30 min work even if fixed in 5 mins.
So cost $ 180 plus parts of $2 for a 5 min job.

smile0784
Rank: Premium Member
Rank: Premium Member
Joined: Thu Apr 26, 2012 5:16 pm
Has liked: 39 times
Likes received: 356 times

Re: What up with my f..ken hotwater?

Post by smile0784 » Fri May 18, 2018 6:04 pm

Mattblack wrote:
purple5ive wrote:
smile0784 wrote:Shower was fine.for 2.years then stated dripping even tho turned taps on super hard ao i replaced washes and now problem started
And the Moral of the story is??

Get the Professionals to look at it :rofl:

also take those grommets out and you will use a lot more water than normal, its there for a reason!
That's un-Australian! Might cost you twice as much as getting a plumber, but at least you can say you fixed it yourself!

Worse case scenario is that you buy a set of new taps (you might have buggered them by wrenching them tight instead of replacing the washers)
Good point mite try that after the gromit issue

smile0784
Rank: Premium Member
Rank: Premium Member
Joined: Thu Apr 26, 2012 5:16 pm
Has liked: 39 times
Likes received: 356 times

Re: What up with my f..ken hotwater?

Post by smile0784 » Fri May 18, 2018 6:06 pm

purple5ive wrote:
Mattblack wrote:
purple5ive wrote:
smile0784 wrote:Shower was fine.for 2.years then stated dripping even tho turned taps on super hard ao i replaced washes and now problem started
And the Moral of the story is??

Get the Professionals to look at it :rofl:

also take those grommets out and you will use a lot more water than normal, its there for a reason!
That's un-Australian! Might cost you twice as much as getting a plumber, but at least you can say you fixed it yourself!

Worse case scenario is that you buy a set of new taps (you might have buggered them by wrenching them tight instead of replacing the washers)
unaustralian hah!! its called being smart hahaha
what if you can never fix it yourself??
Never know unleas you try.lol

Locked

Return to “Off Topic Forum”