Coota craft gun shot 18ft

[hornet]

Leden, as per cobby post those are totally different boats and I cant see how you can possibly compare them.

Hornet, incorrect.

So eden craft are not ex- haines hulls also ?

[frozenpod]

Eden craft are not coota craft.

Eden craft hulls are based on haines hunter molds. They started out as ex haines molds but I have been told they have made new molds for all models. They certainly have made a new mold for the 233.

[hornet]

this is what I said => So eden craft are not ex- haines hulls also ?

where did I say coot a craft are eden craft ?


FYI... http://www.australianboatmags.com.au/pd ... 8_prev.pdf" onclick="window.open(this.href);return false;

[bowl]

A guy that has gunshot that launches werribee says the mould is v17 with a pod...?

[hornet]

Quote from the link article I posted..


Time Out: This is when -and how - many of the original ‘classic’ Haines Hunter moulds started to be sold off to other boat builders around south eastern Australia - and to this day, a variety of boat
builders can genuinely claim to have boats that DID start life as genuine Haines Hunters, even if the transactions were - in most cases - subsequently ruled illegal by the courts.

[frozenpod]

I wouldn't describe it that way.

The gun shot is based on the V17 but the hull has been extended and possible other tweaks as a new mould was built.

What is sometimes called a pod is part of the moulded hull, not a bolt on pod. Good design IMO just not full width so you can add trim tabs on the side.

The other transom setup I like is the haines signature and seafarer which both use a half pod that is also moulded.

All three designs allow for a flat transom without having the motor(s) too far back and not too difficult to reach a rod around.

[frozenpod]

Quote from the link article I posted..


Time Out: This is when -and how - many of the original ‘classic’ Haines Hunter moulds started to be sold off to other boat builders around south eastern Australia - and to this day, a variety of boat
builders can genuinely claim to have boats that DID start life as genuine Haines Hunters, even if the transactions were - in most cases - subsequently ruled illegal by the courts.

What relevance does that have to your original post below.

Looks like the Haines Hunter 565 L has been re-birthed as a coota craft

when Haines hunter sold off all the molds most were bought by small boat builders and reborn in one fashion or another...

all the coota crafts are original haines hull's...

[hornet]

Yes frozenpod all the original haines hunter hulls / molds have been modified in one way or another

my original post is correct

in essence they are made from original Haines hunter hulls, modified or not.

[frozenpod]

Err no your original post isn't.

[hornet]

I disagree, I have boxes of boating mags starting in the 70's till late 90's confirming my claims

believe what you will I don't intend debating, I know what I've researched.