Interesting enough, when I was shopping around to buy, the dealer in Warrnambool said skid trailers were better for alloy hulls as rollers had potential to damage the hull over time. The dealer I eventually went with (mainly due to proximity) dismissed this & said rollers made launch & retrieve easier. I’ve been looking at a lot of trailers at the ramp this summer & the majority look better built than Dunbiers. Would have done things a lot differently in hindsight.Kimtown wrote:I've got a dunbier skid trailer, which I drive on fairly easily anyway?
Could it be converted to rollers for even more simplicity or should I just keep it the way it is if I'm not having too much problems?
Trailer Modifications
-
- Rank: Gummy Shark
- Joined: Tue Sep 06, 2016 1:08 pm
- Location: South East Suburbs
- Has liked: 625 times
- Likes received: 298 times
Re: Trailer Modifications
- Kimtown
- Rank: Premium Member
- Joined: Tue Jul 04, 2017 9:29 pm
- Has liked: 303 times
- Likes received: 310 times
Re: Trailer Modifications
Lets be honest, dealers are gonna say whatever best suits them, not the buyer, unfortunately.Mattblack wrote:Interesting enough, when I was shopping around to buy, the dealer in Warrnambool said skid trailers were better for alloy hulls as rollers had potential to damage the hull over time. The dealer I eventually went with (mainly due to proximity) dismissed this & said rollers made launch & retrieve easier. I’ve been looking at a lot of trailers at the ramp this summer & the majority look better built than Dunbiers. Would have done things a lot differently in hindsight.Kimtown wrote:I've got a dunbier skid trailer, which I drive on fairly easily anyway?
Could it be converted to rollers for even more simplicity or should I just keep it the way it is if I'm not having too much problems?
In saying that, my trailer seems very simple to drive on. But it's hard to compare not ever having owned a roller trailer.
-
- Rank: Premium Member
- Joined: Thu Sep 27, 2012 2:04 pm
- Has liked: 81 times
- Likes received: 109 times
Re: Trailer Modifications
Mattblack wrote:
Mate...what a response! 100% agree with what you (& everyone else) has said about my issue. What really sh!ts me is that when I 1st got theboat a few years ago, I told the dealer I thought it wasn’t sitting in the trailer straight & was told it was normal & most boats did that. Seems to have gotten worse this season so I’m presuming it’s got itself more out of alignment.
I’m sure it’s an easy fix, but instead of mucking around I think I’ll shoot down to https://trailerrepaircentre.com (thanks Steve) and get them to get it running right. I’ll post the results...thanks again everyone
It is pretty easy to do yourself. You only need basic tools and a jack.
Sounds like the dealer was telling your porkies.
-
- Rank: Premium Member
- Joined: Thu Sep 27, 2012 2:04 pm
- Has liked: 81 times
- Likes received: 109 times
Re: Trailer Modifications
Some fact and a lot of crap.Mattblack wrote:Interesting enough, when I was shopping around to buy, the dealer in Warrnambool said skid trailers were better for alloy hulls as rollers had potential to damage the hull over time. The dealer I eventually went with (mainly due to proximity) dismissed this & said rollers made launch & retrieve easier. I’ve been looking at a lot of trailers at the ramp this summer & the majority look better built than Dunbiers. Would have done things a lot differently in hindsight.Kimtown wrote:I've got a dunbier skid trailer, which I drive on fairly easily anyway?
Could it be converted to rollers for even more simplicity or should I just keep it the way it is if I'm not having too much problems?
I have had rollers, skids and bunks.
A bad roller trailer with very few rollers can damage the hull dints or cracks. If they incorrectly setup and you can damage/mark the hull.
Rollers are expensive and to work properly particularly with a heavy glass boat you need lots of them.
They also need to be adjusted correctly which takes time and effort that very few these days are prepared to do.
A good roller trailer is the best for your hull and is the easiest to launch and retrieve.
Personally for a glass boat I would only have rollers.
Skids are simple need very little setup and adjustment saving dealers time and most importantly they are cheap.
Skids are great for alloy and a good skid trailer would be better than a crap roller trailer.
For alloy boat I would be happy with skids if you used good ramps.
Carpet bunks don't suit alloy and they have a much higher resistance.
They are much more of a float on float off design so you have to back the trailer much further into the water.
Not to bad on a good step ramp but they are an issue with shallow ramps.
They are simple easy to setup and cheap but wear through the gel coat on glass boats.
-
- Rank: Gummy Shark
- Joined: Tue Sep 06, 2016 1:08 pm
- Location: South East Suburbs
- Has liked: 625 times
- Likes received: 298 times
Re: Trailer Modifications
https://roxom.com.au/tutorials/boat-tra ... -correctly (as per Nudeup) :thumbsup:frozenpod wrote:Mattblack wrote:
Mate...what a response! 100% agree with what you (& everyone else) has said about my issue. What really sh!ts me is that when I 1st got theboat a few years ago, I told the dealer I thought it wasn’t sitting in the trailer straight & was told it was normal & most boats did that. Seems to have gotten worse this season so I’m presuming it’s got itself more out of alignment.
I’m sure it’s an easy fix, but instead of mucking around I think I’ll shoot down to https://trailerrepaircentre.com (thanks Steve) and get them to get it running right. I’ll post the results...thanks again everyone
It is pretty easy to do yourself. You only need basic tools and a jack.
Sounds like the dealer was telling your porkies.
- Kimtown
- Rank: Premium Member
- Joined: Tue Jul 04, 2017 9:29 pm
- Has liked: 303 times
- Likes received: 310 times
Re: Trailer Modifications
Any idea what the best type of trailer would be for a PWC?frozenpod wrote:Some fact and a lot of crap.Mattblack wrote:Interesting enough, when I was shopping around to buy, the dealer in Warrnambool said skid trailers were better for alloy hulls as rollers had potential to damage the hull over time. The dealer I eventually went with (mainly due to proximity) dismissed this & said rollers made launch & retrieve easier. I’ve been looking at a lot of trailers at the ramp this summer & the majority look better built than Dunbiers. Would have done things a lot differently in hindsight.Kimtown wrote:I've got a dunbier skid trailer, which I drive on fairly easily anyway?
Could it be converted to rollers for even more simplicity or should I just keep it the way it is if I'm not having too much problems?
I have had rollers, skids and bunks.
A bad roller trailer with very few rollers can damage the hull dints or cracks. If they incorrectly setup and you can damage/mark the hull.
Rollers are expensive and to work properly particularly with a heavy glass boat you need lots of them.
They also need to be adjusted correctly which takes time and effort that very few these days are prepared to do.
A good roller trailer is the best for your hull and is the easiest to launch and retrieve.
Personally for a glass boat I would only have rollers.
Skids are simple need very little setup and adjustment saving dealers time and most importantly they are cheap.
Skids are great for alloy and a good skid trailer would be better than a crap roller trailer.
For alloy boat I would be happy with skids if you used good ramps.
Carpet bunks don't suit alloy and they have a much higher resistance.
They are much more of a float on float off design so you have to back the trailer much further into the water.
Not to bad on a good step ramp but they are an issue with shallow ramps.
They are simple easy to setup and cheap but wear through the gel coat on glass boats.
Something that's very easy for beach/river/lake launch/retrieves where there isnt great access via ramps
-
- Rank: Bream
- Joined: Sat Sep 20, 2014 6:42 pm
- Location: Altona meadows
- Has liked: 28 times
- Likes received: 221 times
Re: Trailer Modifications
Hey mattblack i found that if the boat is leaning a bit to one side,this also causes it to go off,also if trailet is too far in the water the back could still be floating
-
- Rank: Gummy Shark
- Joined: Tue Sep 06, 2016 1:08 pm
- Location: South East Suburbs
- Has liked: 625 times
- Likes received: 298 times
Re: Trailer Modifications
Nah, I’ve been trying different depths since I got it...the sweet spot is when the water touches the reflector on the mudguard. I can actually spin the front wobble roller on the Portside (where the scratches are)...it has some weight on it, but very little.fishnut wrote:Hey mattblack i found that if the boat is leaning a bit to one side,this also causes it to go off,also if trailet is too far in the water the back could still be floating
-
- Rank: Gummy Shark
- Joined: Tue Sep 06, 2016 1:08 pm
- Location: South East Suburbs
- Has liked: 625 times
- Likes received: 298 times
Re: Trailer Modifications
They are simple easy to setup and cheap but wear through the gel coat on glass boats.[/quote]
Any idea what the best type of trailer would be for a PWC?
Something that's very easy for beach/river/lake launch/retrieves where there isnt great access via ramps[/quote]
You have a Ute don’t you?
https://m.youtube.com/watch?v=S6AQdWzzoKU
Any idea what the best type of trailer would be for a PWC?
Something that's very easy for beach/river/lake launch/retrieves where there isnt great access via ramps[/quote]
You have a Ute don’t you?
https://m.youtube.com/watch?v=S6AQdWzzoKU
-
- Rank: Premium Member
- Joined: Thu Apr 26, 2012 5:16 pm
- Has liked: 39 times
- Likes received: 356 times
Re: Trailer Modifications
If it's fine just leave it alone lolKimtown wrote:I've got a dunbier skid trailer, which I drive on fairly easily anyway?
Could it be converted to rollers for even more simplicity or should I just keep it the way it is if I'm not having too much problems?