How do I fix or replace the plastic on front hatch?
-
- Rank: Premium Member
- Joined: Thu Apr 26, 2012 5:16 pm
- Has liked: 39 times
- Likes received: 356 times
How do I fix or replace the plastic on front hatch?
Hi
Just after some advice on how to fix my front hatch on the boat?
I think its possible to pull the old one out and put a new piece in and then just put a silicon seal.
Does anyone know where to buy a new sheet of plastic?
I spoke to quintrex and they said need to see a aluminium fabricator to make up a new one for around $500
Any other ideas or a cheaper option.
Cheers Ricki
Just after some advice on how to fix my front hatch on the boat?
I think its possible to pull the old one out and put a new piece in and then just put a silicon seal.
Does anyone know where to buy a new sheet of plastic?
I spoke to quintrex and they said need to see a aluminium fabricator to make up a new one for around $500
Any other ideas or a cheaper option.
Cheers Ricki
-
- Rank: Australian Salmon
- Joined: Fri Jul 31, 2015 7:35 am
- Has liked: 1 time
- Likes received: 38 times
Re: How do I fix or replace the plastic on front hatch?
Is the hatch Plastic / See through or not
Leave broken piece/s in place and Realign the broken edges, apply "Selleys 401 adhesive" the top surface/crack and allow to harden for a few days, the longer the better - When hardened sufficiently remove hatch and repeat process on "Underside"
or
Maybe replace with "Toughened Glass" - Check around for Glass cutting companies in your region as to who may be able to cut for you.
Good Luck
Leave broken piece/s in place and Realign the broken edges, apply "Selleys 401 adhesive" the top surface/crack and allow to harden for a few days, the longer the better - When hardened sufficiently remove hatch and repeat process on "Underside"
or
Maybe replace with "Toughened Glass" - Check around for Glass cutting companies in your region as to who may be able to cut for you.
Good Luck
- chris srsc
- Rank: Premium Member
- Joined: Fri Mar 18, 2016 2:17 pm
- Likes received: 2 times
Re: How do I fix or replace the plastic on front hatch?
Talk to chris at busybee plastics in dandy..
FISH1617 : 183CM
Salt (38cm) Trevely 38cm snapper 65cm gummy 80cm
Fresh (0cm)
Salt (38cm) Trevely 38cm snapper 65cm gummy 80cm
Fresh (0cm)
- crumpet_avenger
- Rank: King George Whiting
- Joined: Sat Jul 23, 2011 8:16 am
- Location: rowville
- Has liked: 6 times
- Likes received: 13 times
Re: How do I fix or replace the plastic on front hatch?
There are plenty of places that cut perspex to size. Just get the measurements and tell them. Cheaper option by far
- chris srsc
- Rank: Premium Member
- Joined: Fri Mar 18, 2016 2:17 pm
- Likes received: 2 times
Re: How do I fix or replace the plastic on front hatch?
Or cut it out of plate ally that way it can be stood on if need be...as long as thick enough...lol
FISH1617 : 183CM
Salt (38cm) Trevely 38cm snapper 65cm gummy 80cm
Fresh (0cm)
Salt (38cm) Trevely 38cm snapper 65cm gummy 80cm
Fresh (0cm)
- Boonanza
- Rank: Premium Member
- Joined: Fri Jun 10, 2011 9:31 pm
- Location: Gone Fishing
- Has liked: 270 times
- Likes received: 222 times
Re: How do I fix or replace the plastic on front hatch?
You need to use polycarbonate not plastic. There plenty of plastics fabricators around with routers. All you need to do is take in the broken piece and they can make a new one. :thumbsup:
A smart person knows what to say. A wise person knows whether to say it.
-
- Rank: Garfish
- Joined: Sun Jun 02, 2013 5:03 pm
Re: How do I fix or replace the plastic on front hatch?
http://www.roadtechmarine.com.au/-/Mari ... m/p/MAC705
this place have most things , they may have what your after
this place have most things , they may have what your after
-
- Rank: King George Whiting
- Joined: Mon Mar 07, 2016 5:44 pm
- Location: Healesville
-
- Rank: Premium Member
- Joined: Thu Apr 26, 2012 5:16 pm
- Has liked: 39 times
- Likes received: 356 times
Re: How do I fix or replace the plastic on front hatch?
What's the difference between perspex and polycarbonate?