Lowrance Elite 9. Settings for sonar and downscan

Post Reply
User avatar
Kestrel
Rank: Premium Member
Rank: Premium Member
Joined: Fri Oct 02, 2015 4:15 pm
Has liked: 6 times
Likes received: 27 times

Lowrance Elite 9. Settings for sonar and downscan

Post by Kestrel » Mon Feb 08, 2016 4:14 pm

Hi folks

I've just purchased and installed one of these units.

Are the settings for conventional sonar independent of those for downscan settings?. If you change the settings for conventional sonar are these picked up by downscan?

Cheers

Kestrel

purple5ive
Rank: Premium Member
Rank: Premium Member
Joined: Thu Dec 08, 2011 1:59 pm
Has liked: 567 times
Likes received: 1011 times

Re: Lowrance Elite 9. Settings for sonar and downscan

Post by purple5ive » Mon Feb 08, 2016 5:21 pm

they are both separate entities but share some stuff as far as i know.
i believe things like surface clarity stay between the two.

downscan has 2 frequencies and sonar has a few which are independent of each other.
downscan isnt very adjustable, sonar you can play around a bit more.

someone who has more knowledge might be able to help you out more.

greggo
Rank: Silver Trevally
Rank: Silver Trevally
Joined: Mon Apr 15, 2013 10:05 am
Location: Berwick
Has liked: 5 times
Likes received: 50 times

Re: Lowrance Elite 9. Settings for sonar and downscan

Post by greggo » Mon Feb 08, 2016 5:27 pm

You need to go to downscan in the pages, i.e., have downscan as your main screen to make further changes to it. The same goes for sonar, have it as the main screen.

User avatar
Kestrel
Rank: Premium Member
Rank: Premium Member
Joined: Fri Oct 02, 2015 4:15 pm
Has liked: 6 times
Likes received: 27 times

Re: Lowrance Elite 9. Settings for sonar and downscan

Post by Kestrel » Mon Feb 08, 2016 5:59 pm

greggo wrote:You need to go to downscan in the pages, i.e., have downscan as your main screen to make further changes to it. The same goes for sonar, have it as the main screen.
Thanks. So the settings for conventional sonar and downscan are separate?

K

greggo
Rank: Silver Trevally
Rank: Silver Trevally
Joined: Mon Apr 15, 2013 10:05 am
Location: Berwick
Has liked: 5 times
Likes received: 50 times

Re: Lowrance Elite 9. Settings for sonar and downscan

Post by greggo » Mon Feb 08, 2016 8:33 pm

Kestrel wrote: Thanks. So the settings for conventional sonar and downscan are separate?

K
I cant remember off-hand which settings control both and which are individual, but I know your contrast (which is like your sensitivity) can only be set with the downscan page open.

purple5ive
Rank: Premium Member
Rank: Premium Member
Joined: Thu Dec 08, 2011 1:59 pm
Has liked: 567 times
Likes received: 1011 times

Re: Lowrance Elite 9. Settings for sonar and downscan

Post by purple5ive » Mon Feb 08, 2016 9:41 pm

they are both separate and you need to be in the appropriate type to adjust it.

downscan parameters only available when downscan selected
sonar only when sonar selected.

theres some that are universal, like shallow water, freshwater type setting, surface clarity i believe, and few others. all the other ones can only be set when you chhoose either of them.

same for the gps settings

User avatar
Kestrel
Rank: Premium Member
Rank: Premium Member
Joined: Fri Oct 02, 2015 4:15 pm
Has liked: 6 times
Likes received: 27 times

Re: Lowrance Elite 9. Settings for sonar and downscan

Post by Kestrel » Mon Feb 08, 2016 10:31 pm

purple5ive wrote:they are both separate and you need to be in the appropriate type to adjust it.

downscan parameters only available when downscan selected
sonar only when sonar selected.

theres some that are universal, like shallow water, freshwater type setting, surface clarity i believe, and few others. all the other ones can only be set when you chhoose either of them.

same for the gps settings
Thank you! :a_goodjob:

Post Reply

Return to “Marine Electronics”