need help with general reel maintainence
-
- Rank: Cephalopod
- Joined: Mon Mar 17, 2014 7:31 pm
need help with general reel maintainence
so a couple of months ago, being the idiot i am. i went surf fishing with my good rod. and got the whole reel submerge in water. so when i got home, i took it apart and washed the whole thing with water. now the when i crank the handle it makes noises, where do i grease so it likes box condition again.
-
- Rank: Flathead
- Joined: Sat Sep 07, 2013 3:58 pm
Re: need help with general reel maintainence
Dont wash with water if went in the water,clean with turp,water will rust ,for noisey more likely could be bearings,some movement parts inside...for best u do is put grease on moving parts and bearings and spoolDano wrote:so a couple of months ago, being the idiot i am. i went surf fishing with my good rod. and got the whole reel submerge in water. so when i got home, i took it apart and washed the whole thing with water. now the when i crank the handle it makes noises, where do i grease so it likes box condition again.
- seephil
- Rank: Silver Trevally
- Joined: Wed Oct 24, 2012 2:43 pm
- Location: Hughesdale
- Has liked: 37 times
- Likes received: 2 times
Re: need help with general reel maintainence
Is it a spin reel? I youtube reels according to brands. Most of my reels a shimanos so they are all quite similar. Easy to clean. But if you have rust on your bearings and gears....might be worth replacing it.
-
- Rank: Cephalopod
- Joined: Mon Mar 17, 2014 7:31 pm
Re: need help with general reel maintainence
yeah its a jarvis walker spin reel. how do i get rid of the sand in it? whats the best way to wipe it off? and where do i get the grease.seephil wrote:Is it a spin reel? I youtube reels according to brands. Most of my reels a shimanos so they are all quite similar. Easy to clean. But if you have rust on your bearings and gears....might be worth replacing it.
- seephil
- Rank: Silver Trevally
- Joined: Wed Oct 24, 2012 2:43 pm
- Location: Hughesdale
- Has liked: 37 times
- Likes received: 2 times
Re: need help with general reel maintainence
Go To your local angling shop or Anaconda/BCf and pick up some grease and oil.
To get rid of the sand? where is the sand? If the sand is near the pinion gears... you should replace the reel. If its under the rotor before the the drag, it should be ok to wipe it off.
Might be a good idea to download the schematics of that reel from JW to strip your whole reel down and reassemble it.
To get rid of the sand? where is the sand? If the sand is near the pinion gears... you should replace the reel. If its under the rotor before the the drag, it should be ok to wipe it off.
Might be a good idea to download the schematics of that reel from JW to strip your whole reel down and reassemble it.
- ducky
- Rank: Premium Member
- Joined: Thu Feb 28, 2013 5:17 pm
- Has liked: 22 times
- Likes received: 332 times
Re: need help with general reel maintainence
To be honest mate it will be cheaper to replace the Jarvis walker reel with a new one than it will be to get it completely serviced and running smoothly again. Chances are now that is is grindy that youve done irreparable damage to parts and no matter what you do or replace it will never be the same again. Take it as a lesson and be glad it wasn't a really expensive reel.
-
- Rank: Australian Salmon
- Joined: Sun Apr 28, 2013 8:19 pm
Re: need help with general reel maintainence
The grinding can be sand in the actual clutch. I have had this happen but a full disassemble and thorough clean with something like wd40 all purpose cleaner and degreaser then regrease and reassemble. As mentioned before you can usually get the reel schematic online if you are having troubles reassembling. Did both my Penn 750ssm recently and they both had sand in them but they are sweet as now after doing this.
-
- Rank: Kingfish
- Joined: Thu Aug 08, 2013 5:08 pm
- Location: Bellarine peninsula
- Has liked: 333 times
- Likes received: 569 times
Re: need help with general reel maintainence
If you are going to have a crack at doing it yourself download the schematics as you pull it apart place each piece on a cloth take a photo each piece clean all the parts in kero/white spirit once dry reassemble in the reverse order of the photo's.you can buy reel oil and grease from most tackle shops.grease on the gears oil on the bearings/bushes light spray of wd40 inside reel housing. Jarvis walker reels are pretty straight forward.
-
- Rank: Cephalopod
- Joined: Mon Mar 17, 2014 7:31 pm
Re: need help with general reel maintainence
alright thanks guys, ive decided to get a new reel. the reel has too many parts to pull apart
- Tomcat1
- Rank: Premium Member
- Joined: Sun Jun 24, 2012 1:21 am
Re: need help with general reel maintainence
i advise using wd40 instead of degreaser. if there are plastic parts degreaser might damage them. wd40 for cleaning and fresh grease should work