Can this Rod be repaired?
- CremeDeLaCreme
- Rank: Premium Member
- Joined: Sat Aug 06, 2011 12:19 am
- Has liked: 1 time
- Likes received: 2 times
Can this Rod be repaired?
Hi all,
Can this Rod be repaired?
Is it a minor problem and can the rod still safely be used?
It looks like a few small cracks have formed where the 2 pieces join.
Can this Rod be repaired?
Is it a minor problem and can the rod still safely be used?
It looks like a few small cracks have formed where the 2 pieces join.
Addicted to fishing since 1973
- FishSamFish
- Rank: Australian Salmon
- Joined: Tue Nov 06, 2012 10:11 pm
Re: Can this Rod be repaired?
Yes if it f.glass, doubt it if it's carbon, but the price you will pay to get it repaired may outweighs the costs of replacing it. Try get it on warranty, get a quote else, new rod.
Go check armada lie angler, it's where iget rods repaired since I have a knack of breaking them.
Go check armada lie angler, it's where iget rods repaired since I have a knack of breaking them.
-
- Rank: Banjo
- Joined: Sun Jan 20, 2013 12:47 pm
Re: Can this Rod be repaired?
yes the rod can be repaired
there may be some splitting in the female part of the join , but you wont know til you take the thread off the blank and have a look .
the cracks you see are in the epoxy coating
all you can do to fix it is take the old thread off and rebind the join ........ it may pay to bind it a bit further up than it goes at the moment to increase the strength of it .
good luck with it
cheers kiwi
there may be some splitting in the female part of the join , but you wont know til you take the thread off the blank and have a look .
the cracks you see are in the epoxy coating
all you can do to fix it is take the old thread off and rebind the join ........ it may pay to bind it a bit further up than it goes at the moment to increase the strength of it .
good luck with it
cheers kiwi
- Fish-Hunter
- Rank: Murray Cod
- Joined: Fri Jun 17, 2011 9:45 am
- Likes received: 2 times
- Contact:
Re: Can this Rod be repaired?
It looks like its only the thread & epoxy , if theres no damage to the blank , then it can easily & cheaply be repaired . Take it to your local tackle shop , they can advise you .
-
- Rank: Cephalopod
- Joined: Tue Aug 30, 2011 1:36 pm
Re: Can this Rod be repaired?
Yeah, looks like Miker's right, just the poxy on the binding has come off.
Trim the loose stuff off and get a 2 part epoxy glue and smear around the area, just be careful not to get any on the inside of the ferule.
Trim the loose stuff off and get a 2 part epoxy glue and smear around the area, just be careful not to get any on the inside of the ferule.
- Fish-cador
- Rank: Kingfish
- Joined: Fri Jul 08, 2011 1:00 pm
- Has liked: 10 times
- Likes received: 105 times
Re: Can this Rod be repaired?
No need to spend a lots of money repairing it.
heat the epoxy lightly then slice it off with the knife together with the theads. Careful not to heat it too much as you may damaged the rod. Or you can just scrape off the old expoy and binding slowly and carefully. Once done, wrap a new binding thread (I use my own thin braid fishing line). You may use superglue to secure the binding. Put clear epoxy on top of the new binding. Quick dry epoxy is best for the job as it will not drip.
even cut and cracked blanks can be repaired. I still use my 2 pc Starlo Stix flat spin that became 3 pcs when I tried to drag a sambo out of a gutter. Still works just fine.
heat the epoxy lightly then slice it off with the knife together with the theads. Careful not to heat it too much as you may damaged the rod. Or you can just scrape off the old expoy and binding slowly and carefully. Once done, wrap a new binding thread (I use my own thin braid fishing line). You may use superglue to secure the binding. Put clear epoxy on top of the new binding. Quick dry epoxy is best for the job as it will not drip.
even cut and cracked blanks can be repaired. I still use my 2 pc Starlo Stix flat spin that became 3 pcs when I tried to drag a sambo out of a gutter. Still works just fine.
OF ALL THE THINGS I LOST, I MISS MY MIND THE MOST.
====
Words of wisdom:
"I will never argue with an idiot. He might drag me down to his level then beat me with experience"
====
====
Words of wisdom:
"I will never argue with an idiot. He might drag me down to his level then beat me with experience"
====
- Messiah
- Rank: Australian Salmon
- Joined: Tue Oct 23, 2012 5:12 pm
Re: Can this Rod be repaired?
Sound like a proFish-cador wrote:No need to spend a lots of money repairing it.
heat the epoxy lightly then slice it off with the knife together with the theads. Careful not to heat it too much as you may damaged the rod. Or you can just scrape off the old expoy and binding slowly and carefully. Once done, wrap a new binding thread (I use my own thin braid fishing line). You may use superglue to secure the binding. Put clear epoxy on top of the new binding. Quick dry epoxy is best for the job as it will not drip.
even cut and cracked blanks can be repaired. I still use my 2 pc Starlo Stix flat spin that became 3 pcs when I tried to drag a sambo out of a gutter. Still works just fine.
U should be a rod repairs person
-
- Rank: Australian Salmon
- Joined: Wed Oct 31, 2012 10:56 pm
Re: Can this Rod be repaired?
yep fixable as they have said remove the threa and check the blank. if the blank is cracked then turn it into a 1 pc rod with some araldite!!
Flexcoat is the pro finish to make it look the same, Gudebrod Aqua metallic and Black metallic, and pearl if i am not wrong are the colours.
Let me know if you need info on sourcing any of these.
Flexcoat is the pro finish to make it look the same, Gudebrod Aqua metallic and Black metallic, and pearl if i am not wrong are the colours.
Let me know if you need info on sourcing any of these.
- Fish-cador
- Rank: Kingfish
- Joined: Fri Jul 08, 2011 1:00 pm
- Has liked: 10 times
- Likes received: 105 times
Re: Can this Rod be repaired?
Messiah wrote:
Sound like a pro
U should be a rod repairs person
experience, experience, experience. Learned by trial and error at times and sometime just through plain creativity. :tongue: get you hands dirty rather than pay others to do the simple job. :tongue:
OF ALL THE THINGS I LOST, I MISS MY MIND THE MOST.
====
Words of wisdom:
"I will never argue with an idiot. He might drag me down to his level then beat me with experience"
====
====
Words of wisdom:
"I will never argue with an idiot. He might drag me down to his level then beat me with experience"
====